24V Solenoids
24V Solenoids
24V Solenoids
24V Solenoids
24V Solenoids
24V Solenoids

Part #: 57220

24V Solenoids

Type
  • For replacing solenoids which open and close 24V automatic irrigation valves
  • Stainless steel rod, copper core, insulated lead wires, and waterproof resin casing
  • Compatible with valves from Orbit, Hydro-Rain, and other major brands
  • See compatibility chart for solenoid interchangeability of various valves
    • In stock, ready to ship
    • Inventory on the way
    Regular price$13.89
    /
    Shipping calculated at checkout.

    Description

    Solenoids open and close automatic irrigation valves. They operate via a 24V electrical connection to an irrigation controller. When electricity flows from the controller to the solenoid, a small steel rod inside of the solenoid lifts off a bleed hole, allowing the valve diaphragm to open and water to flow through the valve. These replacement solenoids are for 24V irrigation valves. They have a stainless steel rod, copper core, insulated lead wires, and a waterproof resin casing which protects the internal components. Interchangeability of 24V solenoids depends on the footprint. See compatibility chart in the images.

    While it is relatively rare for a solenoid to fail, replacement is very straightforward. Simply turn the water mainline off, remove the waterproof nuts from the wires of the existing solenoid, unthread the solenoid from the valve, thread the new solenoid into the valve, connect the solenoid wires with new waterproof wire nuts, and turn the water mainline back on. For outdoor irrigation use with cold water only.


    Customer Reviews

    Based on 30 reviews
    50%
    (15)
    10%
    (3)
    7%
    (2)
    3%
    (1)
    30%
    (9)
    T
    TM-AZ
    Orbit Solenoid rescues RainBird drip system

    I bought a new house that has a drip irrigation system here in Arizona. One zone did not work so I ordered a new solenoid from Orbit because I have an Orbit Controller. I received the new Orbit Solenoid and it fit into the existing RainBird valve and it fits and works perfectly. I'm going to order another Solenoid to have as a spare.

    C
    Clafro
    The new solenoids don't leak.

    The new solenoids don't leak like the ones that came with the valves I bought. It is kind of crazy you couldn't just send replacement o-rings because that's all that was needed.

    A
    Anonymous
    I need two solenoids for an Orbit Valve Part Number 57223 3/4-inch NPT

    I need two solenoids for an Orbit Valve Part Number 57223 3/4-inch NPT. I explained this to your customer service rep. Unfortunately, the two solenoids that were sent to me will not work. Also, the valve part number listed above is not listed as a valve that the replacement solenoids you sent will work with.

    Thank you for leaving a review about your valve's model/part number and how the 2 solenoids in your order will not work. Someone from our Customer Care team will be reaching out to you with further assistance. Have a great rest of your day.

    J
    Jed
    Jed Dobberstein

    Item is what was needed.

    p
    phillip
    It is

    It works

    You may also like