Skip to content
The Orbit Flow Meter measures the water used from your outdoor hose faucet. Adjust your water consumption based on the measurements to prevent over-watering, saving you money. The meter calculates both single-use and total water consumption. Perfect for measuring how much water it takes to fill up your pool or water the plants in your garden. Choose to display the amount of water used in gallons or liters. For outdoor use with cold water only.
The Orbit water hose flowmeters (2) are connected to the two residential outside hose faucets for downline Orbit B-Hyve timers and controllers.
The Orbit water hose flowmeter digital LCD readout is a 4 numbers format with a max 999.9 gal, than the display will rollback to 000.0 gal for the total “Lifetime” history and the individual event usage.
The Orbit flowmeter is reset to 0.0 gallons (press both buttons) for the event and the history each evening before next morning watering cycle. This daily reset will then record the actual 24 hour watering cycle total water usage for the residential irrigation hose system, which delivers an average of 1500 gallons in a 2 day period, thus exceeding the flowmeter 999.9 gallons readout limit. The flowmeter daily readout gallons used is recorded each day with a photo.
Does orbit have a pushbutton procedure to increase the flowmeter readout display to 5 or 6 digits, greater 1000 gallons?
It is always nice to know how much water you are putting into the water tank on your RV especially if you only want a certain amount or you're having to pay by the gallon. This is the perfect solution.
Easy to use
