Brass & Stainless Steel Misting Nozzle - 5 pack | 10106

The Orbit Brass and Stainless Steel Misting Nozzle delivers water-efficient outdoor cooling for patios, decks, and landscaped areas. At just 1/2 gallon per hour per nozzle, these are among the most water-conservative mist nozzles on the market—meaning you get effective evaporative cooling without the guilt of waste.

Built from corrosion-resistant brass (57% copper minimum) with a stainless steel orifice, these nozzles are engineered for heavy seasonal use and tested for 1,000+ hours of continuous operation. The fine .012" orifice produces a consistent, uniform mist pattern that feels more like a refreshing fog than scattered spray, minimizing drift and maximizing comfort in high-heat environments.

Setup is straightforward: Thread directly into any standard 10/24-threaded mist line opening. The integrated o-ring seal prevents leaks at the connection point. No special tools needed. This pack includes 5 nozzles, enough for a single misting line or to replace tired heads in an existing system.

Performance matters on pressure: These nozzles operate optimally between 25–160 PSI. At the lower end (25–60 PSI), you get ultra-fine mist ideal for delicate cooling. At higher pressures (100+ PSI), you get faster evaporation and wider coverage—useful for larger outdoor spaces or commercial applications. Check your system's output before ordering.

Maintenance is minimal but important: Mineral deposits from hard water can accumulate in the orifice over a season, reducing flow uniformity. A quick soak in misting nozzle cleaner (sold separately) every few months keeps performance consistent. The stainless steel orifice resists corrosion even in harsh climates, so these nozzles last multiple seasons with basic care.

Who uses these: Homeowners retrofitting cooling into patios or pergolas. Landscapers setting up temporary or permanent misting zones. Outdoor event planners. Anyone serious about water-smart cooling who doesn't want to compromise on reliability or aesthetics.

Inlet thread: 10/24 UNC
Orifice diameter: 0.30 mm (.012")
Materials: Brass (57% copper minimum), stainless steel (300 series)
Seal: Color-coded o-ring (black)
Operating pressure: 25–160 PSI
Flow classification: Medium water usage (ultra-low orifice category)
Tested durability: 1,000 hours continuous operation