1/2-in. Drip-Lock® Fittings
1/2-in. Drip-Lock® Fittings
1/2-in. Drip-Lock® Fittings
1/2-in. Drip-Lock® Fittings
1/2-in. Drip-Lock® Fittings
1/2-in. Drip-Lock® Fittings
1/2-in. Drip-Lock® Fittings
1/2-in. Drip-Lock® Fittings
1/2-in. Drip-Lock® Fittings
1/2-in. Drip-Lock® Fittings
1/2-in. Drip-Lock® Fittings
1/2-in. Drip-Lock® Fittings
1/2-in. Drip-Lock® Fittings
1/2-in. Drip-Lock® Fittings
1/2-in. Drip-Lock® Fittings
1/2-in. Drip-Lock® Fittings
1/2-in. Drip-Lock® Fittings
1/2-in. Drip-Lock® Fittings

Part #: 67046

1/2-in. Drip-Lock® Fittings

Fittings
  • For making connections to 1/2-inch drip tubing in a variety of landscape designs
  • Stainless steel teeth grip and a special O-ring creates a rotatable, watertight seal
  • Built-in removal collar facilitates easy removal and reuse of fittings
  • Drip-Lock manifold provides an easy way to transition to 1/4-inch tubing
  • Compatible with 1/2-inch drip distribution and emitter tubing from Orbit, Hydro-Rain, and other major brands
  • For optimum drip zone performance use with a filter and pressure regulator
  • In stock, ready to ship
  • Inventory on the way
Regular price$3.49
/
Shipping calculated at checkout.

Description

Drip-Lock fittings connect 1/2-in. drip distribution or emitter tubing to a sprinkler line, hose faucet, or valve. They fit 1/2-in. tubing with outside diameters ranging from .630- to .700-in. Stainless steel teeth grip the pipe tightly and a special O-ring creates a watertight seal while still allowing for rotation of the fitting after insertion. A built-in removal collar allows for easy reconfiguration and reuse of the fittings, including end-of-season disassembly for compact winter storage. The Drip-Lock manifold is an especially convenient way to connect 1/2-in. distribution tubing to 1/4-in. distribution tubing which can then go to each individual plant. For outdoor irrigation use with cold water only.

Say Goodbye to Glue and Clamps

Smooth sailing ahead with Drip-Lock fittings! Our innovative push-to-connect design creates secure, leak-free connections in seconds. Just push your Distribution or poly pipe into the fitting and feel it lock into place—no fumbling with special tools or clamps.

Always improving

Gen 1 - All black for 0.700-inch tubing

Gen 2 - Black with Brown Collars for tubing from 0.690 to 0.710 inches

How Does Drip-Lock Work?

The science behind the simplicity:

  • Stainless steel teeth grip firmly to your pipe
  • Specialized EDPM gasket creates a perfect watertight seal
  • Rotating capability for perfect drip line positioning

Cut

Measure your drip distribution or emitter tubing and cut it straight with pipe cutters

Push

Install the pipe into the fitting until it stops, about 1/2 an inch (just over 1.5 cm). Depress the release collar to remove or change the fittings.

Done

Test by gently pulling back to confirm secure connection. That's it! No special tools required. Your system is ready to use immediately.

Customer Reviews

Based on 10 reviews
80%
(8)
10%
(1)
10%
(1)
0%
(0)
0%
(0)
A
Anonymous
I have used these coupling for some time now

I have used these coupling for some time now , They work great.

A
Anonymous
easy

easy installation

H
Heidi D.
My favorite

This whole line makes watering easy. You can design your system to fit the plants size and water needs. Hard to find but worth the effort

T
The M.W.
Much Easier the Barbed

Using the easy to remove 1/4inch on so.much better. Besides that, connecting the 1/4" drip tubing to easy on manifold sure beats pok8ng holes in the 1/2" drip feeder line. Removals is wonderful.

M
MARK F.
Like them, just need to plan ahead

Great stuff!! Expensive. Hard to take them off if the have been on the tube for a while, but I can do it with a little ingenuity. Once installed you can't turn the tube in the fitting, ust need to be aware and plan accordingly.

You may also like