Part Number 71003, 71008, 71020
Protect your whole home and everything in it that matters most from water leaks. The B-hyve smart flood sensor detects the presence of even the slightest amounts of water and can be controlled from anywhere with a free smartphone app. iOS and Android. All sensors controlled from a free app on your smartphone. iOS and Android. Choose your pack size below.
Water damage can start from the top down. Place sensors near windows and eaves in the attic and stay ahead of water damage in your whole house.
A damaged water heater is a costly flood waiting to happen. Protect your whole house, place sensors around your water heater, get alerted to the slightest amount of water.
A leaking sink or toilet can lead to costly water damage in an instant. Protect your home with flood sensors around sinks and toilets. Get alerted to the slightest amount of water.
Defective appliances can be the starting point of a costly home flood. Put B-hyve flood sensors around all appliances and keep your entire home safe from dangerous water damage.
A leaky or cracked window can be a gateway to serious water damage. Protect your entire home by placing B-hyve flood sensors near every window and window well. Be alert and keep your family safe.
Basements and crawlspaces are areas of your home that might not be checked frequently. Get notified immediately if an pipe starts leaking under your home to avoid costly surprises.
Homes today have numerous devices from Smart Speakers to Cell Phones. Protect your valuable devices from damage with B-hyve sensors.
Items with strong emotional connections are invaluable. Protect the precious things in your life from floods and water damage. Place B-hyve flood sensors near all your special keepsakes.
Use the Orbit Flood Sensor
to protect what matters most.
Use near your water heater to watch for leaks 24/7 and save potentially thousands of dollars in repairs
Place near washing machines or dishwashers to alert you of leaks even if you aren't home
Place Flood Sensor under your sinks and toilets to detect those slow leaks
Place one under windows and window wells to detect water intrusion as early as possible
Protect those memories that can't be replaced. Place a Flood Sensor anywhere you store your keepsakes for piece of mind.
Protect your living spaces by knowing if water has made it places it shouldn't be.
Electronics and water don't mix, so place a Flood Sensor near your valuable equipment to help protect it.
Roof leaks can go undetected for days or even months, but the damage starts imediately. Place Flood Sensors in the attic to know about leaks as soon as they happen.
Get alerts about flooding, leakage, or water damage on your smartphone or directly from the sensor with audible sound alerts.
Even the smallest amounts of water will be detected and you will be alerted. Prevent serious damage to your home and possessions.
Water-resistant and strong to withstand the most rigorous flood. Discrete size allows you to conceal it easily.
Water on cables or wires can cause bodily harm. The B-hyve smart flood sensor alerts you to all possibilities of water intrusion or damage. It protects what you cherish most.
Buy Now
Floods can start from anywhere: water heaters, sinks, toilets, refrigerators, pipes. B-hyve sensors come in packs of 1, 3, 5, 8 and 20 and have a strong waterproof adhesive mount so they can go everywhere potential damage may start.
Buy Now
You’ll be alerted to the presence of even the smallest amount of water. Get temperature alerts when freezing temps might cause pipe damage. Each sensor also has audible sound alerts if your smartphone isn’t handy. Easily controlled from your smartphone, iOS, or Android.
Buy Now
Only logged in customers who have purchased this product may leave a review. Log in now
| Bluetooth | 5.0 |
|---|---|
| Batteries | CR2032 |
| Wifi Bandwidth | 2.4Ghz |
| Power Requirements | 100-240V AC |
| App Compatibility | 100-240V AC iOS - iPhone iPad and iPod Touch running iOS 13 and higher. Android - Android version 4.3 and higher. |
| Warranty | 1 Year |
trbement (verified owner) –
Having had flood problems in the past, this idea is simply GENIUS. I purchased the 8 pack several moths ago and the app is still reporting 100% battery level on all sensors. However, there are a few shortcomings I hope will be addressed. First and foremost is with the flood notifications in the app. A simple “text message chime” or an e-mail at 2:00 am is frankly insufficient. If a leak is detected, there should be a full on steady alarm until the notification is acknowledged. After all, this is the entire purpose of the flood monitor and without a sufficient notification system it’s value is severely compromised. I’m on an iPhone and understand that there may be limitations to overcome. Second, I receive notifications of individual sensors disconnecting regularly (7 were reported last week, which is average). The sensors will reconnect on their own, typically within 30 minutes to a few hours. All 8 sensors are within 40 feet direct line (probably less) of that hub, but even the two less than 15 feet away (but admittedly through a wall) disconnect on occasion. Overall I’m happy enough that I plan to buy another hub (which will hopefully improve the disconnection problem) and few more sensors. This system has already demonstrated its value with a quick warning on a leak from a recently installed water heater. Please address the concern with the notification system and this will be a solid 5 star product.
(1) (0) Watch Unwatch
Terry Townson (verified owner) –
Love the sensor size and quick response time! Purchased the 3 pk/hub and the 5 pk since the website wouldn’t allow purchase of 8 pack/hub. This made setup a little challenging since there’s a process required to 1st setup the 3/hub and then add the 5 pk. Overall setup is relatively simple although I’ve had several occasions where the sensor’s dropped off the network and have owned the system for a couple months.
Notification only produces a very low db sound that would not alert someone leaving you dependent on the phone app. I’m attempting to figure out a way to have my phone alert me ONLY when receiving the email alert notice from orbit and to override silent/vibrate mode with an audible tone.
The app has a bug showing Celsius although the numbers actually are Fahrenheit. Customer support has been easy to reach via text and say they are working the issue.
I’m also using the sensors in my freezer and they work great! The orbit engineers didn’t recommend this functionality but it has been working great. Am also monitoring the HVAC drip pans in the attic for flood and temp(they have also dropped off the network 3-4 times in the past couple months and are then automatically picked back up after a period of time)
OVERALL: A great sensor but needs better notification. I hope there’s an upgrade that includes this function without current users having to buy more sensors since they are already expensive.
(1) (0) Watch Unwatch
CJeffs (verified owner) –
I purchased the 3 pack of water sensors. Setup is very simple and easy with additional request for min max temperature. Drawbacks are that the sensors do not show much information unless they go off. When viewing from the app you only see the last time sync’d, MAC address and firmware and hardware versions. I have a couple of other sensors from a different vendor that include WiFi signal strength, battery life, current temperature and humidity which is a bit more functional than these.
(1) (0) Watch Unwatch
bryanfishkind (verified owner) –
So, 3 months later, the house is back in order (new flooring, drywall, baseboards, etc.) and I’m ready to install my 8 sensors. Having done so, I now am unable to get them all to work at the same time, due to distance, I guess. We’ll see what a second router does. BTW, I love my outdoor B-hyve sprinkler timer and really much want to love the flood sensors. Would like the company of Orbit to also love the flood sensor division enough to put some $$$ into their own app site, versus having to navigate through the timer site in order to get to it. Stay dry, everyone!
(0) (0) Watch Unwatch
izadinia (verified owner) –
Hi. I have bought 13 leak detectors and linked them to the hub. The problem is that some of these detectors randomly disconnect and reconnect a couple hours later. At any given time, one or two of my sensors are disconnected. They probably have a bluetooth connectivity issue.
(0) (0) Watch Unwatch